Is body armor legal for civilians?

YES! You may be surprised to learn that body armor is legal for almost anyone to own! Many people believe that body armor is illegal to own unless you are a law enforcement officer, but that is simply not true.

Body armor is legal in all 50 states with ONLY the following three restrictions:

• Body Armor is illegal if you have been convicted of a violent felony.

• Body armor may not be shipped to a civilian in Connecticut. Body armor purchases in Connecticut may only occur “face to face.”

• Body armor is not intended for criminals. Wearing body armor while committing a crime will increase penalties greatly.

The Soft Side

The modern warrior has a spectrum of choices in the body armor arena. There are some guidelines, though, that anyone can follow in deciding what they will need when they armor up. The first is soft armor. Soft armor has been one of the most powerful additions to law enforcement in the last 30 years. It has saved countless lives and is now considered part of the uniform. Soft armor is tested and rated by the National Institute of Justice (NIJ). The NIJ breaks armor down into five categories based on ballistic performance. Essentially they are listed by what rounds they can resist. The categories are: Level I: .22 LR; Level IIA: 9mm to .40 S&W; Level II: 9mm to .357 Magnum; Level IIIA: .357 SIG to .44 Magnum; Level III: 7.62mm rifle rounds; Level IV: Armor-piercing .30-06.

What NIJ Rating Is Best For Me?

First, ask yourself: “Do I need protection against handgun and shotgun threats, rifle threats, or both?” Remember, there is a direct trade off between protection, comfort, and concealability. The higher the protection level, the heavier and less concealable the armorThe best armor is the armor you actually wear.   With that in mind, it is best to select the most lightweight armor that will protect you from the threats you are most likely to encounter.

If you are like most of us, you need protection from handguns and shotguns, and will want soft body armor in a leve ii or iiia. Level ii (which is great if you are looking for the most concealable option possible) and level iiia (which is great for protection against larger, faster handgun threats and protection all the way up to 12 gauge slugs!) Nowadays, most people are deciding to go with iiia because it offers a great deal of protection while still being very lightweight and concealable.

Ceramic & Poly Plates

While soft armor is a solid performer at resisting handgun rounds, those who may face rifle threats turn to plates. Armor plates are generally designed to supplement soft armor with a few that can be standalone. As with soft armor, plates are rated for the rounds that they can resist. There are two main categories in plates: Level III, which protect against rifle rounds, and Level IV, which resist armor-piercing rifle rounds.

Plates are constructed from a variety of materials and wrapped in proprietary coverings. The interior material defeats the bullet, and the backing material helps contain it inside the plate. The most common types of plates are ceramic and polyethylene. Ceramic plates have been around since the beginning of serious plate development. They work by fracturing on impact and, in doing so, decelerate the round. The backing material of Kevlar, for example, keeps the round inside the plate. The problem with ceramic armor is that it is both fragile and less effective against multiple rounds. Once the round strikes the plate, a cavitation effect takes place. The result is a cone of plate damage expanding inward from the point of impact. That cone area is now less resistant than it previously was. Because of this fragile nature, I’ve seen plates break from being tossed into cars or the corner of the team room. Even hairline fractures can cause the armor to fail. Weighing in at about 7.5 pounds, a set of ceramic plates can add a very noticeable 15 pounds to an already-heavy rig.

A second type of plate that has caught the attention of the professional community is polyethylene. This is a type of specially designed plastic with the capacity to defeat rifle rounds. Poly armor works differently because it is designed to dramatically expand the incoming round or even break it up while bleeding the energy off. It does this by utilizing the rotation of the round. As the round spins in, it creates friction, which melts a portion of the plate. This melting is one of the unique strengths of poly plates. After the round is captured, the plate cools and seals around the bullet. This allows the plate to be more effective against multiple hits. Companies like Grey Ghost Gear have managed to even create Level IV standalone plates. Coming in at almost 50 percent lighter than ceramic or steel, it has some distinct advantages.

One last plate to mention is steel. While not on the top of elite operators’ loadout lists, correctly coated steel can be a less expensive, reliable alternative.

Picking Carriers

Both soft and plate armor must be worn in quality carriers if they are expected to perform well. Most soft armor companies provide a cotton or polyester carrier with Velcro straps. This is appropriate for people who need to wear their armor under street clothes. This application is as about as far as it goes for effectiveness, though. More commonly an exterior carrier will be purchased for your armor. Carriers are essentially broken into two categories: full carriers, which have the capacity to carry both soft and plate armor, and plate carriers.

Multi-load carriers come in a variety of flavors with a spectrum of MOLLE and attachment points for related gear. The buyer should consider what the end use will be and start from there. Regardless of application, there are certain characteristics that make carriers solid choices. Long-time players in this business like Tactical Tailor make gear designed for serious use without breaking the bank.

Specifically, people should look for certain characteristics. First is multi-stitching on seams and attachment points. This is critical because it ensures durability and can save a life. While drag handles attached on the upper back are helpful if you need to extract a wounded comrade, it should not be the only place to grab the vest. A well-made vest can be grabbed anywhere and survive if a downed officer is dragged to safety.

Another piece of advice is to avoid gear with elastic in the shoulders. Over time the elastic will weaken and your vest will sag. If the vest is not fitted correctly, then you are exposing vulnerable areas.

What about adjustability? From shoulder straps to the cummerbund, the vest needs to be able to be customized to you. A friend or teammate is helpful when you are fitting your vest. They can hold, tighten and square the rig up to help you make sure it is fitted correctly. When it is finally fit to you, the front plate needs to be centered on your torso with the top of the front plate lining up with the top of the sternum. The back plate needs to mirror the front plate.

Before You Roll

There are some general things to always remember about body armor and carriers. First, the carrier offers no protection at all. Without armor, that well-made carrier becomes an expensive shirt. Keep your armor in the carrier. The only type of armor guaranteed to fail is the one left in the trunk.

It is important to take care of both your carrier and your armor. Follow the manufactures’ instructions to help keep it in good working order. On that note, realize that most armor is only rated to last for five years. This is based on environmental issues, projected wear and tear, and general use. If your armor is ever shot, it must be replaced. The point of impact weakens the armor and could potentially lead it to fail if hit in the same area again. Lastly, body armor is bullet resistant—not knife resistant. If you will be in a situation where edged weapons are a real issue, you need to acquire stab-resistant armor.

The arena of body armor and carriers is diverse and sometimes confusing. Educate yourself on what your real needs are and dress to meet those needs. Never take shortcuts, making an educated decision will allow you to secure a long-lasting, comfortable and effective rig to help keep you alive.